EnOcean Gateway (434)
The 434 EnOcean Gateway allows you to connect wireless and batteryless EnOcean controls to a Helvar DALI lighting network.
It can be mounted on the ceiling or on walls, and requires only a single electrical connection to a DALI network.
Once installed, the 434 will support up to 20 EnOcean switches without any other wiring. The switches are batteryless, thanks to energy-harvesting technology, and maintenance-free. Energy is generated by pressing the EnOcean button, and a radio signal is sent to the Gateway.
The EnOcean switches can be configured in just a few minutes using Helvar’s Designer or Toolbox software.
Key Features
- Integrate wireless, batteryless switches into DALI
network.
- Simple installation.
- Gateway is powered by the DALI network.
- Up to 20 switches can be integrated via one gateway.
Technical Data
Connections
|
DALI:
|
Removable 2-part connector block Wire size: 0.5 mm² – 2.5 mm² solid or stranded
|
Cable rating:
|
All cables must be mains rated.
|
Power
|
DALI supply input:
|
13 V – 22.5 V
|
DALI consumption:
|
20 mA
|
Operation
|
Supported profile:
|
EnOcean EEP F6–02–xx, F6-04–xx (PTM 210/215 normal mode)
|
Range (switches):
|
Typical EnOcean Switches: 30 m (unobstructed space)
|
Max. No. of switch units per gateway:
|
20
|
Operating frequencies
|
The following models can be safely used in the countries listed below:
|
Model
|
Frequency and countries
|
434
|
868 MHz European Union, Iceland, Liechtenstein, Norway, Switzerland and other countries adopting the RED directive.
|
434/R2*
|
928 MHz Japan and other countries adopting the ARIB specification.
|
Mechanical data
|
Dimensions:
|
110 mm (⌀) × 58 mm
|
Weight:
|
75 g
|
Colour:
|
White: RAL 9002
|
IP code:
|
IP30
|
Operating conditions
|
Ambient temperature:
|
0 °C to +50 °C
|
Relative humidity:
|
Max. 90 %, noncondensing
|
Storage temperature:
|
–10 °C to +70 °C
|
Conformity and standards
|
EMC:
|
EN 55015 EN 61547
|
Safety:
|
EN 60950-1
|
RED:
|
EN 300220-2 (434) EN 301489-3 (434)
|
ARIB:
|
STD-T108 (434/2)
|
Status LED
EnOcean Receiver
Receives control commands from EnOcean switches (available separately).
Status LED: red or green.
In normal operation, the LED remains unlit.
The red LED flashes to indicate one of the following:
- FAST: DALI network in process of discovering the Gateway.
- FAST: Designer or Toolbox software identifying the Gateway.
- SLOW (every 1.25 s): Gateway is in Learning Mode.
The green LED flashes to indicate the following:
- The Gateway is in Learning Mode, and has detected a switch (received a signal from a switch unit).