Bộ cảm biến Helvar - 320 PIR Sensor

320 PIR Sensor

 

 PIR Sensor (320, 320B, 320P, 320PB) Datasheet

 

 The PIR Sensor is a compact sensor that provides energy saving functions in a DALI system. It can turn the lights on when its coverage area is occupied, and off when it is unoccupied. The sensor’s settings are adjusted using Helvar’s Designer or Toolbox software.

Due to its excellent detection performance, the PIR Sensor is especially suitable for applications where small or slow movements take place for extended periods of time, such as offices or classrooms. Since its detection sensitivity is less dependent on movement direction than that of most PIR sensors, fewer units are required to reliably cover a target area.

The unit can be mounted into a ceiling void or onto a solid surface using Helvar’s SBB-C (white) or SBB-CB (black) mounting box (sold separately).

 

 

 Key Features

  • Excellent detection performance through high sensitivity and multidirectional coverage.
  • 10 mA DALI current consumption.
  • Compact and functional design.
  • Programmable in Designer and Toolbox

 

Technical Data

Connections

DALI:

Removable connector block

Wire section:

0.5 mm² – 1.5 mm² solid or stranded

Cable rating:

All cables must be mains rated.

Electrical Data

DALI supply input:

13 V – 22.5 V

DALI consumption:

10 mA Max

Sensors

Presence detector:

Passive infrared (PIR)

Mechanical data

Max. recommended mounting height:

4 m

Presence detection coverage area:

46 m² @ 2.5 m mounting height

Mounting hole diameter:

51 mm +/- 1 mm

Note: If replacing older sensor then 52 mm to 55 mm mounting hole is acceptable.

Ceiling thickness:

Maximum 25mm

Bezel diameter:

66 mm

Recommended clearance depth:

10 cm (with cable cover, incl. 5 cm for cabling)

Material (casing):

Nonflammable PC/ABS (UL94–V0)

Finish/Colour:320, 320P:

Semi-matt / White RAL 9003

320B, 320PB:

Semi-matt / Anthracite grey RAL 7016

Weight:

66.3 g

IP rating:

IP30 [IP20 cable cover]

Operation

Start-up time:

≤ 1 sec

Operating and storage conditions

Ambient temperature:

0 °C to +50 °C

Relative humidity:

Max. 90 %, noncondensing

Storage temperature:

–10 °C to +70 °C

Conformity and standards

EMC emission:

EN 55015

EMC immunity:

EN 61547

Safety:

EN 61347-2-11

Environment:

Complies with WEEE and RoHS directives.

Software compatibility

Designer:

5.4 or later

Toolbox:

2.4.2 or later




Next Previous

Related Items