Bộ Gateway Helvar - EnOcean Gateway (434)

EnOcean Gateway (434)

 

 The 434 EnOcean Gateway allows you to connect wireless and batteryless EnOcean controls to a Helvar DALI lighting network.

It can be mounted on the ceiling or on walls, and requires only a single electrical connection to a DALI network.

Once installed, the 434 will support up to 20 EnOcean switches without any other wiring. The switches are batteryless, thanks to energy-harvesting technology, and maintenance-free. Energy is generated by pressing the EnOcean button, and a radio signal is sent to the Gateway.

The EnOcean switches can be configured in just a few minutes using Helvar’s Designer or Toolbox software.

 

 

Key Features

  • Integrate wireless, batteryless switches into DALI

network.

  • Simple installation.
  • Gateway is powered by the DALI network.
  • Up to 20 switches can be integrated via one gateway.

 

Technical Data

Connections

DALI:

Removable 2-part connector block Wire size: 0.5 mm² – 2.5 mm² solid or stranded

Cable rating:

All cables must be mains rated.

Power

DALI supply input:

13 V – 22.5 V

DALI consumption:

20 mA

Operation

Supported profile:

EnOcean EEP F6–02–xx, F6-04–xx (PTM 210/215 normal mode)

Range (switches):

Typical EnOcean Switches: 30 m (unobstructed space)

Max. No. of switch units per gateway:

20

Operating frequencies

The following models can be safely used in the countries listed below:

Model

Frequency and countries

434

868 MHz European Union, Iceland, Liechtenstein, Norway, Switzerland and other countries adopting the RED directive.

434/R2*

928 MHz Japan and other countries adopting the ARIB specification.

Mechanical data

Dimensions:

110 mm (⌀) × 58 mm

Weight:

75 g

Colour:

White: RAL 9002

IP code:

IP30

Operating conditions

Ambient temperature:

0 °C to +50 °C

Relative humidity:

Max. 90 %, noncondensing

Storage temperature:

–10 °C to +70 °C

Conformity and standards

EMC:

EN 55015 EN 61547

Safety:

EN 60950-1

RED:

EN 300220-2 (434) EN 301489-3 (434)

ARIB:

STD-T108 (434/2)

 

Status LED

EnOcean Receiver

Receives control commands from EnOcean switches (available separately).

Status LED: red or green.

In normal operation, the LED remains unlit.

The red LED flashes to indicate one of the following:

  • FAST: DALI network in process of discovering the Gateway.
  • FAST: Designer or Toolbox software identifying the Gateway.
  • SLOW (every 1.25 s): Gateway is in Learning Mode.

 

The green LED flashes to indicate the following:

  • The Gateway is in Learning Mode, and has detected a switch (received a signal from a switch unit).


Next Previous

Related Items