Couldn't load pickup availability
Đặc điểm sản phẩm
DIGIDIM 500 W Thyristor Dimmer (455)
The DIGIDIM 500 W Thyristor Dimmer (leading edge) is a DALI-compatible lamp interface unit for use in a DIGIDIM lighting control system.
The dimmer is a DIN-rail mounted unit that can control a maximum load of 500 W. It can be connected to mains voltage lamps directly, or to low voltage lamps via a wire-wound transformer. The dimmer is provided with a status LED and a physical selection switch.
The LED provides status and fault indications, the physical selection switch is used to identify the device during system configuration.
Note: This unit does not contain a DALI power supply. Therefore, one must be incorporated elsewhere in the system.
Key Features
- Out-of-box operation. No programming required when using DIGIDIM slider, rotary or push button panels.
- Input voltage and frequency fluctuation compensation ensures stable output levels with fluctuating incoming mains levels.
- Over current and over temperature protection.
- DIN-rail mounted and only 35 mm wide.
Additional Functions
The following functions may be programmed using the DIGIDIM Toolbox software:
- Maximum/minimum levels, fade times*, scenes* and groups*
- Dimmer status report
- System failure level/ignore
- Power on level
- Power on to last level
* These functions are also programmable using a Helvar infrared remote handset.
Technical Data
|
Connections |
|
|
DALI: |
Standard DIGIDIM removable terminal block 0.5 mm² – 1.5 mm² stranded or solid core |
|
Mains: |
Up to 4 mm² solid core or up to 2.5 mm² strandedNote: If equipment is used in an electrically noisy environment, the DALI cable should be screened and connected to the earth. |
|
Power |
|
|
Mains supply: |
220 VAC – 240 VAC, 50 Hz – 60 Hz |
|
Heat dissipation: |
3.5 W with maximum load (resistive) |
|
DALI supply output: |
None (Use external DALI power supply) |
|
DALI consumption: |
2 mA |
|
Mechanical data |
|
|
Dimensions: |
35 mm × 58 mm × 90 mm |
|
Housing: |
DIN-rail case 35 mm wide |
|
Mounting: |
DIN rail (installation in switchgear/controlgear cabinet) |
|
Weight: |
110 g |
|
IP code: |
IP30 |
|
Operating and storage conditions |
|
|
Ambient temperature: |
0 °C to +40 °C Above this temperature, derate according to the adjacent graph. |
|
Relative humidity: |
Max. 90 %, noncondensing |
|
Storage temperature: |
–10 °C to +70 °C |
|
Conformity and standards |
|
|
EMC emission: |
EN 55015 |
|
EMC immunity: |
EN 61547 |
|
Safety: |
EN 61347-2-11 |
|
Isolation: |
3 kV |
|
Environment: |
Complies with WEEE and RoHS directives. |