444 Mini Input Unit
DIGIDIM Mini Input Unit (444)
The Mini Input Unit is a DALI-compatible interface, designed to allow customer specified switches, sensors, time clocks or other on/off control devices to be incorporated into a DIGIDIM lighting control system.
The Mini Input Unit is a small, prewired, encapsulated printed circuit board and is suitable for inclusion into all standard size back boxes together with a suitable mains-rated switch
Mini Input Unit
A Mini Input Unit used with a four-gang mains switch in a single-gang back box.
Key Features
- Preconfigured with touch dimmer inputs for two groups.
- Fits into all standard size back boxes and architrave style back boxes.
- Touch dimming with a momentary push switch.
- Can be used with momentary or latching switches.
- Fully programmable using DIGIDIM Toolbox software.
Technical Data
Connections
|
Inputs:
|
4 inputs (active low)COM Input Ground
|
Overload protection:
|
± 7 V
|
Short-circuit current:
|
0.5 mA maximum
|
Debounce period:
|
50 ms
|
Voltage-free switched inputs:
|
5 V nominal with switch open, must be less than 0.3 V with switch closed.
|
Isolation:
|
No isolation from DALI network:switches must provide user protection.
|
Cable requirements
|
DALI:
|
DALI Ribbon cable terminated with 1.2 mm ferrules.
|
Cable length
|
170 mmCaution: Do not increase the length of the wires. This can cause interference problems.
|
Power
|
DALI supply output:
|
None (Use external DALI power supply.)
|
DALI consumption:
|
10 mA
|
Mechanical data
|
Dimensions:
|
Encapsulated printed circuit board
|
Weight:
|
10 g
|
IP code:
|
IP20
|
Mounting:
|
For installation in a suitably enclosed location only.
|
Operating conditions
|
Ambient temperature:
|
0 °C to +40 °C
|
Relative humidity:
|
Max. 90 %, noncondensing
|
Storage temperature:
|
−10 °C to +70 °C
|
Conformity and standards
|
EMC emission:
|
EN 55015
|
EMC immunity:
|
EN 61547
|
Safety:
|
EN 61347-2-11
|
Environment:
|
Complies with WEEE and RoHS directives.
|